The Franklin pinafore is a versatile dress that you’ll want to wear again and again. It has a comfy and casual loose fit that can be pulled in at the waist with the tabs when you want that more tailored look. It has deep hip pockets – big enough for a phone or purse! There are also two options for tying the straps in the instructions, to give you more ways to make it yours.
You will need
Main fabric –
115cm/45” wide – 2m/2.2yds
140cm/54″ wide – 1.75m/2yds
Lining – 0.5m/0.6yds
Buttons x4 (approx 2.5cm/1” diameter)
If your fabric is light to medium weight, you may wish to use fusible interfacing to reinforce your waistband and your tabs. You will need no more than 0.25m/0.25yds for this.
Suggested fabrics –
Medium to heavy woven fabrics such as denim, corduroy, twill, tweed or chambray. Some slightly lighter fabrics such as linen.
Suggested linings –
Light to medium woven fabrics with some stiffness such as cotton, lawn, polycotton. If you have used lighter fabrics for the main fabric then the pinafore can also be lined with these.
Not recommended for high-stretch or knitted fabrics.
To buy this print, please go to the designer’s website, or follow the link, and buy the pattern, then save it to you device or PC. From there upload it to the ‘Drop Files Here’ upload section above and if you would like, select your options, by ticking the small box just before it says ‘Check Here’.
If you decide you would like your instruction book printed with your pattern order, then please also upload the Pattern Instruction PDF to the upload area.
There are more in-depth instructions on how to order patterns, try out our FAQ’s page or our A0 order form.
And if all else fails please feel free to email us on firstname.lastname@example.org.